0161 723 13748am - 5pm Mon-Fri
0 £0.00

Artwork Requirements

Important Requirements for Artwork.

When supplying artwork, for Correx- Foamex Signs, acrylic printing or any graphics it must be provided as print ready, a charge may apply to any artwork modifications that we may have to undertake. Please read through our requirements.

General Artwork.

File Format: PDF, EPS, Hi-Resolution JPEG.

If you are providing a PDF, please scale to 100% or 50%

(Please specify the size and scaling percentage on the file name and order).

Alternatively, you may provide an .EPS with a separate .JPG visual attached or Hi-resolution JPG.

File size

Please ensure the file size is reasonable. If a file size is bigger than 100MB; then it may mean that it is not optimised.

If the file is too big to send to us by email, you can use a file transfer site such as wetransfer.com.

Please check the settings in the software you are producing your design in before saving your artwork.

Make sure that image dpi sampled between:

Image resolution: 150 – 300dpi at 100% scale 300 – 600dpi at 50% scale

For large formats apply 150-200dpi at 100% scale 300-400 dpi at 50% scale

All fonts must be converted to curves (outlines, paths)

No Fonts are to be embedded as this can result in fonts substituted for the default font. Please ensure all the fonts are converted to outlines. (curves, paths).

Colours: It is important to use CMYK only, no RGB or spot colours

All graphics including Vector Graphics and Raster Images required in CMYK colour mode, not RGB or spot colours.

PVC banners artwork can be accepted without an outline if it has a colour background so that we can see the final border size required.

GJ Plastics Ltd takes no responsibility for any errors produced in your artwork that you supplied (even if it appears OK on your screen).To avoid ensure that you follow the above instructions to avoid any errors or to have your work reprinted.

Please contact one of the sales team if you require any further information or assistance.